| FBM158 series products |
| Product use: |
|
FBM158 series continuous drying machine is mainly used for polyester spinning process of polyester slice drying processes. < BR > in the polyester spinning process, in order to avoid the containing water of polyester slice caused in the process of high temperature molten polymer degradation, polymer molecules break, cause spinning end breakage rate is high, the impact problem such as reduce variability. Therefore, have to reduce the water content in the slice before spinning, but generally stacking warehouse section water at about 2000 parts per million, for high speed spinning, fine denier silk requirements section water in 20 to 30 parts per million, the series of drying machine is designed to meet the requirements of the above. < BR > the product molecular sieve desiccant device and main instrument (such as grain, temperature controller, the material level meter, programmable controller, etc.) adopt international famous brand products. To in the structural design of crystal bed and drying tower we use the most scientific and reasonable scheme, in the use of performance, quality indicators have been more than domestic and international similar products. |
 | |
|
| FBM158 series polyester crystallization, drying machine process flow diagram |
 |
1 water segregator 2 air dryer 3 the precision filter
4. Pressure reducing valve 5. Electric heater 6. The main drying tower
7.ball valve 8. Dry slice discharging line 9. The fluctuation bed crystallizer 10. Dust the car 11. Butterfly valve 12. Dust separator
13.Air compensator 14.rotary valve 15. Electric heater
16.Butterfly valve 17.Butterfly valve 18.Crystallization of the fan | |
| | |
|
Product features: |
★Use boiling type to the crystallizer, no mechanical and sliced phenomenon, so will never produce powder or broken section, and biopsy can thoroughly remove the original powder.
★Boiling type mold using the latest design, can be arbitrary adjust the air volume of each part and the crystallization time, therefore, does not produce agglomerate phenomenon, can make the section of uniform flow in the crystallizer and the crystallization of so as to achieve the ideal effect. | |
★Drying tower adopts 2 inlet, the secondary air distribution device, can improve the moisture absorption ability is more than double, no dead Angle so as to ensure uniform slices to drop, the bottom also has a section of shunt device, can be arbitrarily connected to several road tremie pipe plugging material.
★Equipment adopts programmable controller automatic control, material layer height, the heating temperature can be adjusted, and don't need specialist operations. < BR > the equipment high energy efficiency, energy saving effect is obvious, for saving energy, decreasing the cost, the device adopts the design of closed gas cycle, can effectively will all dry air recycling, crystal wind circulation use, so the state of normal operation energy consumption less than fifty percent of the installed capacity. |
|
| The main technical parameters |
| The project category |
FBM158-200 |
FBM158-400 |
FBM158-600 |
FBM158-800 |
FBM158-1000 |
FBM158-1200 |
FBM158-1500 |
FBM158-2000 |
| Drying ability(Kg/h) |
200±50 |
400±50 |
600±50 |
800±50 |
1000±100 |
1200±100 |
1500±100 |
2000±100 |
| Dry section of water(PPm) |
25±5 |
25±5 |
25±5 |
25±5 |
25±5 |
25±5 |
25±5 |
25±5 |
| Dry air dew point(℃) |
＜60-80 |
＜60-80 |
＜60-80 |
＜60-80 |
＜60-80 |
＜60-80 |
＜60-80 |
＜60-80 |
| The installed capacity(Kw) |
86.5 |
132 |
150 |
163 |
198 |
201 |
255 |
265 |
| Crystallization of the fan(Kw) |
18.5 |
30 |
30 |
37 |
45 |
45 |
75 |
75 |
| Crystallization heat(Kw) |
50 |
80 |
90 |
90 |
108 |
108 |
120 |
130 |
| Dry heat(Kw) |
18 |
22 |
30 |
36 |
45 |
48 |
60 |
60 |
| Compressed air consumption(Nm3/min) |
2.8 |
3.5 |
4.5 |
6 |
8.2 |
10.5 |
13.5 |
15 |
| The compressed air pressure(Mpa) |
≥0.7 |
≥0.7 |
≥0.7 |
≥0.7 |
≥0.7 |
≥0.7 |
≥0.7 |
≥0.7 |
| The installation area(m×m) |
5×6 |
5×8 |
6×10 |
6×11 |
10×13 |
10×13 |
12×15 |
15×18 |
| The installation height(m) |
7.8 |
9 |
10 |
10.5 |
12 |
12 |
13.5 |
15 |
| The total weight of equipment(Kg) |
5200 |
6600 |
6900 |
9700 |
10400 |
11000 |
12500 |
13500 | |
